Work zone Safety

National Work Zone Awareness

Work Zones Need Your Undivided Attention, We’re all in this together.

The national campaign is conducted every year at the start of the construction season to attract national attention to drive carefully through highway construction and repair sites. Each year, approximately 1,000 people are killed in roadway work zones.

Please Drive Defensively in work zones. Work zones are very dangerous places because so much is happening. To safely navigate through one, always slow down, stay alert, focused and be patient. Always expect the unexpected. Work zone workers, equipment and materials may be in the traffic lanes. Altered road conditions such as edge drop-offs, sharp turns or sloped surfaces can affect your vehicles stability.

Here are 10 defensive driving safety tips for navigating through work zones:

10 Defensive Driving Tips for Work Zones

  • EXPECT THE UNEXPECTED! (Normal speed limits may be reduced, traffic lanes may be changed, and people may be working on or near the road.)
  • SLOW DOWN! Prepare to merge into different traffic lanes. (Speeding is one of the major causes of work zone crashes; obey posted speed limits. Speeding ticket fines are doubled for work zone violations)

  • DON’T TAILGATE! KEEP A SAFE DISTANCE BETWEEN YOU AND THE CAR AHEAD OF YOU. Allow plenty of following distance – at least 3 seconds so you have time to react to hazards (The most common crash in a highway work zone is the rear end collision. So, don’t tailgate)
  • KEEP A SAFE DISTANCE BETWEEN YOUR VEHICLE AND THE CONSTRUCTION WORKERS AND THEIR EQUIPMENT. Watch for the orange work zone cones.
  • PAY ATTENTION TO THE SIGNS! Be prepared to stop! (The warning signs are there to help you and other drivers move safely through the work zone. Observe the posted signs until you see the one that says you’ve left the work zone.)

  • OBEY ROAD CREW FLAGGERS! (The flagger knows what is best for moving traffic safely in the work zone. A flagger has the same authority as a regulatory sign, so you can be cited for disobeying his or her directions.)
  • STAY ALERT AND MINIMIZE DISTRACTIONS! (Dedicate your full attention to the roadway and avoid changing radio stations or eating while driving in a work zone.)
  • KEEP UP WITH THE TRAFFIC FLOW. (Motorists can help maintain traffic flow and posted speeds by merging smoothly, and not slowing to “gawk” at road work equipment and crews.)

  • SCHEDULE ENOUGH TIME TO DRIVE SAFELY AND CHECK RADIO, TV AND WEBSITES FOR TRAFFIC INFORMATION. (Expect delays and leave early so you can reach your destination on time. Check the National Work Zone Safety Information Clearinghouse for information on work zone delays throughout the country.)
  • BE PATIENT AND STAY CALM. (Work zones aren’t there to personally inconvenience you. Remember, the work zone crew members are working to improve the roads and make your future drive safer.)

Information provided by FHWA, Workzonesafety.org and the National Traffic Safety Council.

Today’s Post is by Ken Oswald, Safety and Security Manager for Plateau

keno@plateautel.com

 


OSHA Reinforces Importance of Hi-Vis Apparel

Got this in my inbox this past week from Ergodyne and thought I’d pass it along to you all.

tech bulletin
“Inspection and Citation Guidance for Roadway and Highway Construction Work Zones” Document Instructs OSHA Compliance Officers On Hi-VisOn October 16th, 2012, OSHA released a document that instructs its Compliance Safety and Health Officers to wear ANSI/ISEA 107-compliant Class 2 or Class 3 high visibility apparel when inspecting roadway and highway construction work zones. Direction is also provided for how to cite those who are not compliant.ANSI/ISEA 107-COMPLIANT APPAREL TO BE WORN BY OSHA’S CSHOsOSHA employs Compliance Safety and Health Officers in the field…you know, the folks who write the tickets and issue fines. These CSHOs have been formally instructed as follows:”During the day, the CSHO shall wear, at a minimum, a Class 2 high-visibility safety vest” and “During the night, the CSHO shall wear, at a minimum, a Class 3 high-visibility safety coverall/jumpsuit or a Class 3 high-visibility safety jacket and Class E high-visibility pants, or bib overalls.”Of course this makes perfect sense as the 2009 MUTCD (the law for “all things roadway”) requires all workers in the rightaway of roadway to wear ANSI/ISEA 107-compliant Class 2 of Class 3 apparel…and these CSHOs are, after all, workers.

View the entire Technical Bulletin on the Inner Sanctum.

For more details on the recent OSHA document or for questions on anything regarding ANSI/ISEA 107, please contact Andy Olson at 651.642.5858 or andy.olson.

p1x1.gif


Go Orange for Work Zone Safety Awereness Week

Support the men and women working to improve your highways, roadways and streets by Going Orange for Work Zone Safety Week. These workers could be your family, friends, or the neighbor down the street. Help us encourage everyone to pay attention in work zones and help save lives.

Go Orange for Work Zone Safety kicks off April 23. There isnt one just one way to Go Orange for Work Zone Safety. Wear orange, find your favorite orange symbol. Just be creative and have fun. See how some went orange in 2011.

Don’t Barrel Through Work Zones! Drive Smart to Arrive Alive
2012 National Work Zone Awareness Week, April 23-27

Post or send a photos on the Go Orange for Work Zone Safety photo gallery or tell us why you are Going Orange on the WSDOT Facebook page.

www.flickr.com

Businesses can participate too. Just post a photo of your employees, or turn your building orange. If you send us a logo, we can list your business in our Whos In page. See how businesses can turn their building orange on the How to Participate page.

Drivers generally dont think they are at risk in work zones but they’re wrong:

  • Washington averages almost 1,000 highway work zone injuries each year.
  • 99 percent the people injured or killed in work zone collisions are drivers and their passengers.
  • Most injuries and deaths in work zones are caused by rear-end collisions.
  • Inattentive drivers are not prepared for sudden slow downs and last minute lane changes in work zones.

Work zone survival tips:

  • Slow down to the posted speed and pay attention.
  • Merge as soon as possible.
  • Expect delays, plan for them and leave early or use an alternate route if one is available.

Traffic Safety Alert- National Workzone Safety Awareness

National Work Zone Awareness Week Apr 23-27, 2012.

Work Zones Need Your Undivided Attention

The national campaign is conducted every year at the start of the construction season to attract national attention to drive carefully through highway construction and repair sites. Each year, approximately 1,000 people are killed in roadway work zones.

Please Drive Defensively in work zones. Work zones are very dangerous places because so much is happening. To safely navigate through one, always slow down, stay alert, focused and be patient. Always expect the unexpected. Work zone workers, equipment and materials may be in the traffic lanes. Altered road conditions such as edge drop-offs, sharp turns or sloped surfaces can affect your vehicles stability.

Here are 10 defensive driving safety tips for navigating through work zones:

10 Defensive Driving Tips for Work Zones

  • EXPECT THE UNEXPECTED! (Normal speed limits may be reduced, traffic lanes may be changed, and people may be working on or near the road.)
  • SLOW DOWN! Prepare to merge into different traffic lanes. (Speeding is one of the major causes of work zone crashes; obey posted speed limits. Speeding ticket fines are doubled for work zone violations)

  • DON’T TAILGATE! KEEP A SAFE DISTANCE BETWEEN YOU AND THE CAR AHEAD OF YOU. Allow plenty of following distance at least 3 seconds so you have time to react to hazards (The most common crash in a highway work zone is the rear end collision. So, dont tailgate)
  • KEEP A SAFE DISTANCE BETWEEN YOUR VEHICLE AND THE CONSTRUCTION WORKERS AND THEIR EQUIPMENT. Watch for the orange work zone cones.
  • PAY ATTENTION TO THE SIGNS! Be prepared to stop! (The warning signs are there to help you and other drivers move safely through the work zone. Observe the posted signs until you see the one that says you’ve left the work zone.)

  • OBEY ROAD CREW FLAGGERS! (The flagger knows what is best for moving traffic safely in the work zone. A flagger has the same authority as a regulatory sign, so you can be cited for disobeying his or her directions.)
  • STAY ALERT AND MINIMIZE DISTRACTIONS! (Dedicate your full attention to the roadway and avoid changing radio stations or eating while driving in a work zone.)
  • KEEP UP WITH THE TRAFFIC FLOW. (Motorists can help maintain traffic flow and posted speeds by merging smoothly, and not slowing to gawk at road work equipment and crews.)
  • SCHEDULE ENOUGH TIME TO DRIVE SAFELY AND CHECK RADIO, TV AND WEBSITES FOR TRAFFIC INFORMATION. (Expect delays and leave early so you can reach your destination on time. Check the National Work Zone Safety Information Clearinghouse for information on work zone delays throughout the country.)
  • BE PATIENT AND STAY CALM. (Work zones aren’t there to personally inconvenience you. Remember, the work zone crew members are working to improve the roads and make your future drive safer.)

Information provided by FHWA, Workzonesafety.org and the National Traffic Safety Council.

Today’s post comes to us courtesy of Ken Oswald

Safety and Security Manager for Plateau

koswald